Woodworking is a skill that has been valued since the beginning of time. Many woodworkers enjoy it from an artistic point of view while others enjoy creating larger, more functional items. But whatever it is that you enjoy about woodworking, here are some tips to help you enjoy it even more.
If you have been doing woodworking for some time now you may want to think about using your skills to make your own furniture. If you already have all that you need you could even do this as a service to those that are less fortunate than you. It is a great way to share your passion with others.
Clean your saw’s teeth before cutting lumber. To thoroughly clean your saw blade dip a shop rag into a little acetone and wipe the blade thoroughly. Additionally, using a piece of sandpaper that has a fine grit will remove any sap or gumminess from your skill saw’s cutting blades.
A dry fitting is important to do before adding glue to your wood. You can cause damage if you move things around after gluing them together. Doing a dry-fit gives you a chance to see how everything will go together when you apply glue.
Always follow the owner’s manual when using one of your woodworking tools. Not knowing the manual’s recommendations can result in injury or failure of your tool, and you surely do not want either of these to happen to you. If you have not yet read your manuals do so right away!
When you find a nice level spot on your workshop floor for your table saw, it can be difficult finding the same spot after you put your saw away. When you do find a level spot, use duct tape on the floor so you know where to position your table saw next time you need it.
Do you find that your joint compound seems to dry out in between uses? There is a simple fix to help keep your joint compound moist. Simply pour a small amount of water on top of your joint compound before sealing it. The next time you need to use the joint compound, drain off the excess water and your joint compound will be perfectly moist.
Look for recycled wood. Many places work with wood and throw away scraps. Home improvement stores, flooring contractors and other places often have scrap wood. Look for wood that you can use for projects. This can produce real savings.
Make sure you buy the right tool for the job. When you are building a wooden deck onto your house, it would be difficult to do all the cutting with a hand saw. Instead, you should cut with a circular saw. A circular saw is electric; however, a hand saw is not.
When you first start out in woodworking, a good tip is to go over the plans before you begin. Make sure that you understand them and that they are not missing pieces of information. If you do not understand them or they are incomplete, go to your local home improvement store and see if someone can help you figure them out.
Never cut any pieces of wood without checking for nails, screws and other metal. While donning a pair of goggles keeps your eyes protected, you are still at risk for other injuries. Inspect every piece of wood whether you are re-purposing it or using new lumber. You are better safe than sorry with this safety tip, and checking the boards only takes a few minutes of your time.
As you already know, woodworking can be a very useful and creative hobby. There is a lot of creativity and enjoyment that goes into creating items of wood. Hopefully the tips from above will enhance your woodworking efforts and inspire you to make even more works of art to enjoy.
Leave a Reply