Woodworking is an awesome hobby that leaves you open to so many different options that it could never get old. If you find that you are in a rut when it comes to the skills that you have you should read the article below. It is full of ideas that can bring new elements into the work that you do.
Stir stains and finishes instead of shaking them to mix. Some ingredients they contain will settle at the bottom of the can, which can effect the outcome of your project. Shaking can lead to bubbling, though, which causes its own set of problems. Be sure to stir thoroughly, until all settlement is dispersed evenly and smoothly.
If you will be re-coating an existing finish, be sure that the surface is clean and free of any wax or oils. Then, let it dry completely, and lightly scuff the surface with a 220-grit sandpaper so that the finish you are applying will have something to hold onto.
Whenever you start a new project, consider involving a wood you haven’t used before. It can create an entirely different look and feel for the item, plus it gives you experience with something new. Research how to work with the new wood so you can understand how it functions.
If you enjoy doing woodworking as a hobby, try to use all the materials that you buy and throw away as little as possible. Scrap pieces of plywood or hard wood can be used as sanding blocks for future projects. You can also use scrap wood for wooden dowels in furniture making.
Make sure your workbench is the proper height. It really can make a big difference. It needs to fit you and how you work. Usually if you are around 5’6″ to 5’9″ you probably need one that is between 33″ and 36″ high. If you are 5’10” or taller, you may need one that is between 35″ and 37″ high. Use your bench at its current height to determine if you need to change it to work better for you.
Before you cut into a piece of wood, you need to inspect it to make sure there are not any pieces of metal in the wood. Screws, nails, staples and other metallic object will not only damage your blades, but also pose a safety hazard. Always inspect the wood before you cut.
You should have at least a working knowledge about the most common woods and their characteristics. Keep in mind that all wood has different characteristics. The trees that these woods come from could take the stain differently. Depending on the cut, you will see varying effects on splintering. And, there are quite a few varieties when it comes to grains. All of this will become factors in your woodworking project.
Before you even begin sawing anything, check the blade to make sure it’s in good condition. Dull blades can make simple sawing nearly impossible. Dull blades can also cause costly errors due to damage to your wood.
When you find a nice level spot on your workshop floor for your table saw, it can be difficult finding the same spot after you put your saw away. When you do find a level spot, use duct tape on the floor so you know where to position your table saw next time you need it.
Now that you have read the article above you surely have realized that you have so much more available to work with than you thought before. The key to keeping your hobby interesting is to continue to learn about your options, just as you have by reading the above article. Now get out there are put the above tips to work.