Are you able to work with your hands? Do you find measuring to exact dimensions is simple for you? Would you love to be able to create useful products in your spare time? If so, the hobby of woodworking is truly for you. In fact, you might even be able to turn it into a career with the tips below.
Use pre-stain conditioner if you plan on staining your project. If you use pre-stain conditioners on your project, you’re going to be not as likely to have irregularities on the project when you’re done. These conditioners are going to help smooth out the wood so that the stain can get into it more evenly.
Tape can be your friend when gluing stained wood together. Place the two pieces of wood together in a clamp and tape the seam before applying the glue. Carefully cut the tape along the joint and then separate the two pieces of the wood and apply the glue along the joint. Clamp together and allow to dry. The tape will keep the glue off the wood and is easy to remove once the glue is dried.
If you will be re-coating an existing finish, be sure that the surface is clean and free of any wax or oils. Then, let it dry completely, and lightly scuff the surface with a 220-grit sandpaper so that the finish you are applying will have something to hold onto.
When you are working with wood it is important that you take your time. Being hasty leaves you open to making plenty of mistakes. Instead of focusing on the amount of time it takes you to complete a project, do everything you can to keep your mind on the task at hand.
Visualize your woodworking project from start to finish before taking any tool to the wood. Let your brain and imagination help you get used to what you’re about to do. In fact, when you visualize, you’ll be much less likely to make costly mistakes during the middle of a project.
Be safe when you first start out in woodworking. Wear the proper safety clothing, including goggles. You may feel silly, but you are dealing with sharp tools and splintering wood. These are things that can cause significant injuries to even the most seasoned woodworker. So be safe, and make sure all that are around you are safe too.
Use some affordable filters for collecting fine dust. The filters and micro-filtering bags made to catch this dust can get pricy after several replacements. Try using the ones that are sold for use in household vacuums.
You can buy the cheap ones and easily modify them to fit your shop vacuum. Cut off the top a bit past the small opening. Turn the whole thing inside out so that airflow still flows in the usual direction. Slip it over your foam filter using the retaining ring to keep it in place.
If your door hinges are loose, you can use a golf tee to fix them. Take the door from the frame than then tap in the tee into the screw holes. If there is excess golf tee, cut it off before reinstalling the hinges and door. The screw can bite into the tee.
Keep an eye out for recycled wood. Some woodworking shops discard useful scraps. Many places like home improvement stores will have scrap wood. Look for wood that you can use for projects. This will also be a great way to save some money.
Regardless of your current skill level, the tips above should help you improve your technique. Take each into your mind as you use them when you work. If you can integrate them into your current procedures, you’ll find that the time you spend working with wood will improve day by day.