Woodworking is difficult work. It takes a lot of skill, patience and knowledge to do the job right and create beautiful and useful items. It is also important to follow essential woodworking safety procedures. To learn more about woodworking safety and building sturdy, durable items, keep on reading this article.
Be sure to keep your bandsaw clean at all times. It is best to have a duster on hand when you are doing the sawing for your woodworking project so that you can clean the saw after each time that you use it to cut wood. This will ensure that you can get a great cut every time.
One of the necessary tools for woodworking is the common pencil. Pencils do get lost easily, however. Buy plenty, then store them in an old instant soup container. Fill the container with sawdust and drill holes in the lid. You’ll now have plenty of pencils and the container won’t tip over easily.
Never skip sanding when it is necessary or think that staining hides imperfections in the wood. Wood with scratches, dents and nicks absorbs much more finish or stain than wood that is smooth. When you skip sanding or do not do a thorough job of it, the imperfections stand out even more because of the increased absorption.
Make sure your workbench is the proper height. It really can make a big difference. It needs to fit you and how you work. Usually if you are around 5’6″ to 5’9″ you probably need one that is between 33″ and 36″ high. If you are 5’10” or taller, you may need one that is between 35″ and 37″ high. Use your bench at its current height to determine if you need to change it to work better for you.
Know the characteristics of any wood before you buy or use it for a specific project that requires staining. Lower quality wood will be called paint grade. Stain grade will be of higher quality and have a nicer finish. Also know that veneer and particle board are really quite different. Veneer tends to absorb too little stain, while particle board too much. Using the proper wood makes sure that your project ends up the way you’d like it to.
You can make a sanding block even better. Cut a small slot about 3/8 of inch deep, a little less than an inch from the outside edge. Run it the entire length of the block. Now the sandpaper will fit into this slot easily, and it will stay in place more securely.
Use woodworking kits when you’re just getting started. These kits will come with wood that is pre-cut that you need to start putting together to make your project. This is an ideal way to introduce yourself to the joys of woodworking. Practicing in this way is a good way to prevent waste resulting from newbie errors.
Wear goggles when you are working on your pieces. Wood might fly toward your face at any time, and you want to avoid a trip to the emergency room. You might not think that it is a possibility, but this is one time when it is really important to be cautious.
Try to keep your work area clean as much as possible. There is going to be a lot of wood dust on the floor. Pieces of wood debris may be strewn about. When you keep your work area clean, you reduce the occurrence of injuries. Always keep a broom, dustpan and a large trash can on hand.
As stated in the introduction, working with wood is not a simple thing. You not only have to have the right skills and knowledge about working with the popular material, you also have to practice safety procedures to stay safe. Use the information above to help you work well with wood.
Leave a Reply