When it comes to hobbies, few are as rewarding as woodworking. You can turn yourself a beautiful railing, create a jewelry box for your daughter or create a new dining room table which perfectly matches your renovated flooring. Regardless of the project you want to tackle, the tips below will help you find success.
Using a good wood glue can make joined pieces even stronger than the wood itself. The key to strength in a glued joint is the amount of time the glue takes to set. Glue that takes longer to cure is better than quick setting glue. Slower setting glue has more time to penetrate into the fibers of the wood, which enhances the strength of the joint.
You can use tape to catch excess glue. If you want to prevent oozing glue stains along joints, try clamping pieces together without using any glue. You just put tape on your joint, and then cut along it using a sharp blade. Separate your pieces, and then apply glue. After that, clamp them to each other again. Your glue will ooze on the tape instead of the wood. You can peel off the tape before your glue dries.
Familiarize yourself with the tools that you are going to use. This is a very important tip for the beginner, but even more advanced woodworkers can benefit from it too. Lay out the tools and make sure that you know the workings of each one. If you’ve got a brand new tool to you, spend the time that you need with it.
When trying woodworking for the first time, opt for cheaper woods or even scrap woods. You are going to make mistakes along the way when you are first starting. Make sure you make those mistakes on wood that’s easily replaceable. There’s nothing worse than making a rookie mistake on a very expensive piece.
Always use the safety equiptment that came with any of your woodworking tools. You may feel that a sheild is getting in your way when you are sawing, but its purpose is to protect you from serious injury. If you feel tempted just think of what it would be like to lose a finger or worse.
Be safe when you first start out in woodworking. Wear the proper safety clothing, including goggles. You may feel silly, but you are dealing with sharp tools and splintering wood. These are things that can cause significant injuries to even the most seasoned woodworker. So be safe, and make sure all that are around you are safe too.
Before you cut into a piece of wood, you need to inspect it to make sure there are not any pieces of metal in the wood. Screws, nails, staples and other metallic object will not only damage your blades, but also pose a safety hazard. Always inspect the wood before you cut.
When you need accurate measurements in the 3-foot range, use a drafting square. These are relatively cheap and can be found at any art supply store. They are perfectly straight and extremely accurate. They are less cumbersome than a framing square and are also longer. This will become your go-to tool in your woodworking shop.
If you are just starting woodworking, something great to do is read plans before starting. Unless full instructions are provided, you may end up not being able to complete your project. If you do not understand them or they are incomplete, go to your local home improvement store and see if someone can help you figure them out.
From a tiny match box to a new deck for your backyard, working with wood provides you with tangible rewards which show how skilled you are. In order to better those skills, use the ideas mentioned here and start working smarter. In no time, you’ll find that you are able to achieve even greater results.
Leave a Reply