When it comes to hobbies, few are as rewarding as woodworking. You can turn yourself a beautiful railing, create a jewelry box for your daughter or create a new dining room table which perfectly matches your renovated flooring. Regardless of the project you want to tackle, the tips below will help you find success.
Take the time to plan out your woodworking project step-by-step before you even begin. Doing this will help to ensure that you are going to get the results that you are looking for. If you do not plan ahead it is likely that you will make an error that could ruin the entire project.
Clean your saw’s teeth before cutting lumber. To thoroughly clean your saw blade dip a shop rag into a little acetone and wipe the blade thoroughly. Additionally, using a piece of sandpaper that has a fine grit will remove any sap or gumminess from your skill saw’s cutting blades.
Make sure your work area is safe, well-lit and organized. Working with woods is difficult work, and it is dangerous work when your work area is dim and there are safety hazards in the area. Make sure there are no spills, tripping hazards and other safety hazards that are a disaster waiting to happen.
One of the necessary tools for woodworking is the common pencil. Pencils do get lost easily, however. Buy plenty, then store them in an old instant soup container. Fill the container with sawdust and drill holes in the lid. You’ll now have plenty of pencils and the container won’t tip over easily.
It is handy to carry a small pocket ruler, but it may fall out whenever you bend over. If it falls out, try buying a metal one and use a magnet for picking up screws to keep it from falling out. The magnet will keep the ruler in place.
Take advantage of several tools instead of trying to do all of your work on just one. A jig, a tablesaw, a bandsaw and a lathe all have their own uses. It is important that you know what each of these tools do and you use them accordingly while getting the job done.
Put extra spring in your grip. A spring clamp may be useful sometimes, but only if you can use more than one hand. They are very difficult to open with just one hand. There are ways to make this more simple. It’s a good idea to get all of your clamps assembled on a piece of scrap wood before beginning a glue-up project. In this way, you will be able to retrieve them with one hand as you need them.
One thing to keep in mind with woodwork is always crowning your wood. This is done by looking down the edge of your lumber and finding the high side. Always put the high side up, which will create a more uniform and more supportive floor and roof line for your home.
When you are applying a finish to your completed project, make sure you work in a dust free environment. It is important to sand the wood of your project before applying varnish or paint, and sand it between coats with fine sandpaper. Use extremely fine steel wool before applying the final coat of finish.
From a tiny match box to a new deck for your backyard, working with wood provides you with tangible rewards which show how skilled you are. In order to better those skills, use the ideas mentioned here and start working smarter. In no time, you’ll find that you are able to achieve even greater results.