If you find that you are good with work that involves your hands, consider giving woodworking a try. From measuring to cutting to piecing things together, it is a fun way to spend your time. The tips below will help you get started on the right foot, ensuring your first project is a great one.
Reusable sanding blocks save you time and money. To make them all you need is a few pieces of scrap lumber. Cut a piece of 2×4 into a rectangle approximately 2 inches wide and 4 inches long. Cut a piece of sandpaper the size of your block. Then, spray one side of the piece of lumber with spray adhesive and adhere the sandpaper to the block of wood.
Try making sanding blocks that are reusable on your own. Cut six 3/4″ pieces of plywood for each sandpaper grit. They should be able two and a half inches by four and three-quarters inches. Use some spray adhesive on your blocks and the cork tile. Cut the sandpaper with a utility knife to better fit your block. Put glue on the sandpaper and apply to the cork. Lastly, cut the sandpaper flush with the cork, and label each block.
In a pinch, you can use a hacksaw blade as a makeshift compass. Often you can’t find a compass when you need it in room, when you are away from your shop. You can quickly nail a hole in the middle of a hacksaw blade, then steady the pencil against the proper tooth to get the right length. Draw that circle.
If you have been doing woodworking for some time now you may want to think about using your skills to make your own furniture. If you already have all that you need you could even do this as a service to those that are less fortunate than you. It is a great way to share your passion with others.
Before even beginning a woodworking project, make sure you have an adequate and proper place to work in. You definitely don’t want your living space filled with sawdust. Some woodworking supplies, such as stains, varnish and paint strippers, have noxious fumes. Ideally, you will have a detached garage or a shed to work in since an outside space is an ideal location.
Do you hate those bubbles that form when applying joint compound to your drywall? There is a simple trick that professional drywallers use to avoid this annoying problem. Add two or three drops of dish detergent to your joint compound and you will be rewarded with bubble free joint compound.
Before you paint your wood project, make sure that you have properly sanded the piece. Start with a coarser grade of sand paper, then gradually change to a finer grade. After sanding, wipe your project with a tacky cloth to pick up residual wood dust. After that, your piece will be ready to be painted.
The most important part of any woodworking project is safety. There are many sharp tools that need to be used and you should be very careful when using them. Find out the proper way to use these tools. If they are power tools, read the manual. If they are hand tools, have a professional show you how to use them properly.
If you are good with your hands, woodworking is the activity for you. Take your time to absorb the knowledge you have gained here and you’ll find that entering the world of working with wood becomes easier. In the end, you’ll find success with your projects and a new hobby to enjoy.