Look around as you move throughout your day. You see examples of man’s mastery of woodworking everywhere. From mailbox posts to pieces of furniture and art to full buildings, the power to use wood to create is a reason why civilization even gets to exists in many corners of the world. If you want to empower yourself with this skill, keep reading.
Use hot glue instead of clamps for little things. When cutting, filing, sanding, or finishing something small, use the hot glue gun to glue the piece to your pedestal stick. The glue holds holds just like clamps, if not better than clamps. It also works great for things that clamps will not work on. When you finish your project, loosen it gently with a putty knife.
Unless you are charging it, never leave your tools plugged in and unattended. You never know who might approach your tool, accidentally setting it off. Not only can this damage the items around it, but the person could be hurt and you could be left liable for the end result.
You want to be sure that you have the right size nails for your project. If you get something too big, the wood may break and not be very secure. But using a nail which is not big enough may not penetrate the wood properly and will not hold the pieces together. Make sure you understand what size nail is correct.
Always clean up sanding dust thoroughly before staining or applying a topcoat. If you want a smooth finish, dust is your enemy. Use a vacuum over blowing dust into the air because it settles back onto the wood, and use a damp cloth to ensure all dust is removed from the wood in your final cleanup prior to staining or applying a top coat.
If you’re looking for that first woodworking project, how about starting with a simple box? In fact, that’s probably the most popular first woodworking project out there. Buy some cheap wood that you like, and design a box that could work around your home. Maybe it’s for writing utensils, or perhaps it’s for the kitchen? There are a lot of options.
Did you know that the teeth on a hacksaw face forward? Many people do not know this. It is the opposite of a wood saw. These saws are supposed to cut when pushed forward. Many times the blades are not labeled for correct installation. If this is the case, remember to put the teeth facing forward.
Do you have screws that are out of reach that need tightened, but you can’t fit a screwdriver or your hand in the area? Do not look past your toolbox for the answer. Use your 12 point socket with your long handle screwdriver. Put the socket over the handle of the screwdriver, then use the ratchet to reach tough spots.
Wear gloves when you are doing your woodworking projects. A natural part of woodworking is the risk of getting splinters and other injuries from the wood. If you find it difficult to work well with the gloves you should shop for a pair that does not hinder your performance so that you can be safe.
Learn about using pilot holes. This is pretty simple to do. When driving a screw or hammering a nail into a little piece of wood or getting pretty close to the edge of a piece, it tends to split. Sometimes it’s unavoidable to put a fixing into a place like this. However, drilling a hole through the joint that’s a bit smaller than the fixing can prevent it from splitting.
Now that you have read this article, you know a few things about getting started successfully in woodworking. Use the ideas here to do a project that improves your life. Perhaps you build yourself a deck. Maybe you give new life to a piece of furniture someone got rid of. Whatever your inspiration, this article gave you the knowledge to get some woodworking done!
Leave a Reply