Most people think of handcrafted furniture in reference to woodworking. The craft also pertains to beautifully finished surfaces in a home, such as stair rails and banisters. This article provides information and ideas about gaining the education needed to build a business around selling your services to homeowners looking for a woodworking craftsman.
Don’t neglect sanding your wood. Sanding may be tedious, but the quality of your workmanship will suffer if you leave the scrapes and nicks where they are. Not to mention, those scratches and nicks absorb more stain and paint, making them stand out more, and making your work look shoddy.
Dust can ruin the finish of any woodworking project. Keep dust away from your projects and workbench by vacuuming it up. If you blow or brush it away, it will just land somewhere else, likely back on your project. Also, use a damp cloth to wipe all surfaces before you begin top-coating, or staining.
Whenever you start a new project, consider involving a wood you haven’t used before. It can create an entirely different look and feel for the item, plus it gives you experience with something new. Research how to work with the new wood so you can understand how it functions.
Make sure your workbench is the proper height. It really can make a big difference. It needs to fit you and how you work. Usually if you are around 5’6″ to 5’9″ you probably need one that is between 33″ and 36″ high. If you are 5’10” or taller, you may need one that is between 35″ and 37″ high. Use your bench at its current height to determine if you need to change it to work better for you.
If you are using laminate, a good way to cut the wood is to use tin snips. Tin snips are a great way to cut or trim the laminate into the size you want. This will improve the overall quality of your project.
Always follow the owner’s manual when using one of your woodworking tools. Not knowing the manual’s recommendations can result in injury or failure of your tool, and you surely do not want either of these to happen to you. If you have not yet read your manuals do so right away!
Keeping a small ruler with you in a pocket is a great idea, however it may fall out easily because of its length. Get yourself a ruler made of metal and put it in the pocket where you store your telescoping magnet. The magnet should keep your ruler in the pocket.
When you find a nice level spot on your workshop floor for your table saw, it can be difficult finding the same spot after you put your saw away. When you do find a level spot, use duct tape on the floor so you know where to position your table saw next time you need it.
Carefully going over your plan is crucial with woodworking. Be sure you have a full understanding of what you need to do, and make sure the information is complete. If something is confusing you or you aren’t sure if it needs to be corrected, head to a local hardware store for additional help.
Only cut using sharp tools. Older and dull tools result in tear-outs and even chipping, which is frustrating and a waste of time. Sharp tools means you get clean cuts quickly. You’ll also spend a lot less time sanding things to get just the right look and fit that you need.
Nothing is more satisfying than adding beautiful touches to the interior of a home by using your skills. Now that you have read this article, you have a good basic knowledge about working in a career using your woodworking skills. Now is the time to begin educating yourself for a great future career.
Leave a Reply