You might be one of those people who thought they weren’t good with their hands. However, if you take the time to give it a try, woodworking can show you how magical your hands can be. With just the right tips, outlined below, you’re going to be able to make all kinds of pieces. Keep reading!
Reusable sanding blocks save you time and money. To make them all you need is a few pieces of scrap lumber. Cut a piece of 2×4 into a rectangle approximately 2 inches wide and 4 inches long. Cut a piece of sandpaper the size of your block. Then, spray one side of the piece of lumber with spray adhesive and adhere the sandpaper to the block of wood.
If you have been doing woodworking for some time now you may want to think about using your skills to make your own furniture. If you already have all that you need you could even do this as a service to those that are less fortunate than you. It is a great way to share your passion with others.
Be safe when you first start out in woodworking. Wear the proper safety clothing, including goggles. You may feel silly, but you are dealing with sharp tools and splintering wood. These are things that can cause significant injuries to even the most seasoned woodworker. So be safe, and make sure all that are around you are safe too.
Whenever you work with a saw, make sure that the blade is in tip top shape before you start. Dull blades can make it hard to do as much sawing as you want. A dull blade will also cause you to make mistakes and harm the wood that you’re working with.
Always clean up sanding dust thoroughly before staining or applying a topcoat. If you want a smooth finish, dust is your enemy. Use a vacuum over blowing dust into the air because it settles back onto the wood, and use a damp cloth to ensure all dust is removed from the wood in your final cleanup prior to staining or applying a top coat.
Never allow someone to watch while you are woodworking without wearing the same gear that you are wearing. Being anywhere near the tools is a hazard, even if they are not using them. Wood or parts of the tool could fly into the air and strike them just as they could you.
Sanding blocks are essential woodworking tools. You can create easy to reuse sanding blocks of your very own by simply cutting three-quarter-inch scrap lumber into rectangles measuring 4.75 x 4.50 inches. Cut pieces of cork tile to fit each block. Spray both the rectangle of wood and the rectangle of cork tile with adhesive and press them together. Allow to dry, then spray the backside of an entire sheet of sandpaper with adhesive. Place your newly made block on the sandpaper with the cork on the down-side. Allow to dry and then use a utility knife to cut the sandpaper around each block.
Do you know that different colored tin snips make different kinds of cuts? Tin snips with red handles are used for making left hand turns. Green handled tin snips are used for making right hand turns. Finally, yellow handled tin snips are used for straight lines and gradual curves.
You may think that you can’t be an expert at woodworking, but if you stay interested and learn as much as you can, your expert status is all but guaranteed. Just take it slowly and use everything you have learned here to make great-looking wood pieces that you can show off to everyone. Good luck!
Leave a Reply