Although fun and extremely rewarding, woodworking is very challenging. If you are a novice woodworker and wish to improve your woodworking skills, it is imperative that you take the time to educate yourself. Learn the ins and outs of woodworking to avoid common errors and dramatically improve your skills. This article is packed with great woodworking tips and advice, so read on to learn more.
Don’t guide your saw with your fingers when cutting narrow pieces of wood. Instead, use a piece of scrap wood to safely push the lumber through your table saw. This keeps your fingers safe, which of course are vital for living as well as the continuation of your wood working projects.
If you are bored using power tools for your woodworking project, try your hand at using classic manual tools. For hundreds of years people used no power in their woodworking. Everything was done by hand. It is a challenging way to add some excitement and pride to your next woodworking project.
Never skip sanding when it is necessary or think that staining hides imperfections in the wood. Wood with scratches, dents and nicks absorbs much more finish or stain than wood that is smooth. When you skip sanding or do not do a thorough job of it, the imperfections stand out even more because of the increased absorption.
When you first start out in woodworking, a good tip is to go over the plans before you begin. Unless full instructions are provided, you may end up not being able to complete your project. If you find the plans hard to understand, ask someone with more experience. If they are professional plans, ask the place that sold them to you.
Never cut any pieces of wood without checking for nails, screws and other metal. While donning a pair of goggles keeps your eyes protected, you are still at risk for other injuries. Inspect every piece of wood whether you are re-purposing it or using new lumber. You are better safe than sorry with this safety tip, and checking the boards only takes a few minutes of your time.
Before you paint your wood project, make sure that you have properly sanded the piece. Start with a coarser grade of sand paper, then gradually change to a finer grade. After sanding, wipe your project with a tacky cloth to pick up residual wood dust. After that, your piece will be ready to be painted.
Always clean and sharpen your woodworking tools after you use them. If you do not, the materials and debris left on your tools can make this a less effective cutting tool for your next project. Keeping them cleaned will also extend the life of your tools, saving you money in the long run.
Clean tools last longer; therefore, it is important to clean your tools after each use. Dip a shop rag into a small amount of acetone and wipe each tool to remove any build-up. Afterwards, dip a different shop rag into machine oil and wipe the metal of each tool to help prevent rusting.
Stain only provides color to wood, not finish. You will need to apply a finish coat on top of the stained wood. If you are in a hurry, or short on time, you can use a product that combines both stain and finish together. Be sure to use a higher-quality brush for this, and stain in the direction of the grain.
As discussed earlier in the opening paragraph of this article, woodworking is as difficult to master as it is rewarding. To become a great wood worker, you must learn as much about woodworking as possible and make an effort to constantly educate yourself. Apply the tips and advice from this article to get started on your way to becoming an expert woodworker.
Leave a Reply