If you’ve got a hankering to do do woodworking, you are in good company. Many people aspire to be excellent wood crafters, but few actually achieve that goal. Learning something new is always a bit intimidating, but this needn’t be. You can learn what you need to know to get started by reading the following article.
Use stop blocks to your advantage for more accurate work. When cutting a lot of pieces the same size, no matter how carefully you measure, you often find small variations. Use a pre-cut stop block to make those measurements pinpoint accurate. Then the table saw will stop at just the right length length.
When using stain, try a test on a small scrap you may have available or in an area on the wood that will be out of sight. This will prevent you from getting an unwanted stain color on your final product. Wood is not always predictable, so you can stay away from disappointment and mistakes with this easy test.
Woodworking can be expensive. The actual wood is one of the most expensive parts of any project. The rest of the cost is usually labor, glue and hardware. Sometimes you can save some money by buying a cheaper grade of wood for areas of your project that are not visible. Areas like drawers, backs and bottoms are excellent places to use this wood.
If you will be re-coating an existing finish, be sure that the surface is clean and free of any wax or oils. Then, let it dry completely, and lightly scuff the surface with a 220-grit sandpaper so that the finish you are applying will have something to hold onto.
When staining woods, always test in a hard to see area before moving forward. In fact, if you’ve got a piece of scrap wood, that’s even better. You never know how a type of wood will take to stain, so it’s best to find out in a place that won’t be an issue later on.
Always remember the rule of measuring twice and cutting once. You are human, which means that mistakes are inevitable. However, you can prevent measurement mistakes from turning into cutting mistakes when you measure two or three times. That is going to spare you serious waste, not just in terms of wasted wood, but also money and time.
If you plan on applying any gloss or stain to a piece of wood, it is very important that you sand it down first. Failing to do this step will result in a wood surface that is not very smooth. Use sandpaper to smooth things down then make sure all dust s removed by brushing it with a cloth.
Make use one of the beveled inner part of a pencil sharpener. If you mount it on a small shaft, you can use it in a drill. It a good tool for shaping smaller pieces. When it gets dull, just sharpen it on an emery cloth by running the drill on a slow speed.
One thing to keep in mind with woodwork is always crowning your wood. This is done by looking down the edge of your lumber and finding the high side. Always put the high side up, which will create a more uniform and more supportive floor and roof line for your home.
In summary, you can achieve your woodworking goals by applying the tips above. Keep learning about the craft, and soon you will be an expert. It only takes the desire and the time to hone your woodworking skills. Soon, you’ll be making anything your heart desires and having fun to boot!