It is very exciting getting into the art of woodworking. However, with it being such a large field, many people can feel a little uneasy trying to start out. Don’t let this happen to you. Instead, embrace the following tips, and get started today putting your skills to work with some wood.
Never stain an entire piece of wood without testing a little part of it first. This can help you avoid surprises in case your stain color is different after you’ve applied it. Wood is unpredictable at times and you should do this test so that you aren’t disappointed by the results.
Always stir your stains and finishes instead of shaking them. Some of the ingredients in these stains and finishes tend to settle to the bottom over time. Shaking can lead to bubbling, though, which causes its own set of problems. Stir as best as you can to prevent this from happening.
Clean your saw’s teeth before cutting lumber. To thoroughly clean your saw blade dip a shop rag into a little acetone and wipe the blade thoroughly. Additionally, using a piece of sandpaper that has a fine grit will remove any sap or gumminess from your skill saw’s cutting blades.
When you are working with wood it is important that you take your time. Being hasty leaves you open to making plenty of mistakes. Instead of focusing on the amount of time it takes you to complete a project, do everything you can to keep your mind on the task at hand.
Ask local hardware stores if they sponsor woodworking classes. You may be surprised by what you find! In fact, your local Home Depot or Lowes might have classes available monthly that’ll help you hone your skills. This is a quick way to grow as a woodworker with very little out of pocket costs.
When you need accurate measurements in the 3-foot range, use a drafting square. These are relatively cheap and can be found at any art supply store. They are perfectly straight and extremely accurate. They are less cumbersome than a framing square and are also longer. This will become your go-to tool in your woodworking shop.
Sometimes a little bit of glue is better than a clamp. Every woodworking shop should have a hot glue gun. Hot glue will hold small pieces better than any clamp ever could, if you could even maneuver one in place. When you are done, just gently pry loose with a putty knife.
Make sure that you are wearing the appropriate protective gear when you are working on your woodworking projects. Your safety is of primary importance. Eye protection can protect your eyes from flying wood debris. A pair of strong gloves can protect your hand from splinters. Make sure that you have these essentials before you start on any projects.
Always clean up sanding dust thoroughly before staining or applying a topcoat. If you want a smooth finish, dust is your enemy. Use a vacuum over blowing dust into the air because it settles back onto the wood, and use a damp cloth to ensure all dust is removed from the wood in your final cleanup prior to staining or applying a top coat.
If dust and dirt get into the holes of a brad or nail gun while they are not in use, this can cause them to wear out more quickly. It is a good idea to plug the air inlet holes up with something to prevent anything from getting in there.
Woodworking is a craft enjoyed by young and old alike and has been treasured for centuries. In order to get the most out of it, you must be working towards honing your skills. So, use the tips that have been discussed to help you get going in the right direction today.
Leave a Reply