Don’t be fearful of woodworking. It doesn’t have to be difficult. If you know what you’re doing, you can literally make anything. All you need is the desire and motivation to learn. This article provides you with some of the things you should know if you want to try woodworking.
Keep all of your woodworking tools in a safe and dry place. You want to be sure that your tools are not in reach of children, as well as that they will be safe from moisture and other elements that can cause them to degrade at high rate. Follow this rule and your tools will last a long time.
Keep the floors safe in your woodworking shop. Dust builds up on the floor, making it dangerous for walking. Coat the slippery areas of your shop with a mixture of crushed walnut shells and paint. The walnut shells are just the right consistency to keep the floor rough enough for walking, even when sawdust builds up.
Always wear safety glasses when you are doing anything that involves woodworking. If you do not take the time to put the glasses on you are taking a huge risk that is not sensible. Just think, if you lose your eye sight you will not be able to do woodworking every again.
Be safe when you first start out in woodworking. Wear the proper safety clothing, including goggles. You may feel silly, but you are dealing with sharp tools and splintering wood. These are things that can cause significant injuries to even the most seasoned woodworker. So be safe, and make sure all that are around you are safe too.
When you need accurate measurements in the 3-foot range, use a drafting square. These are relatively cheap and can be found at any art supply store. They are perfectly straight and extremely accurate. They are less cumbersome than a framing square and are also longer. This will become your go-to tool in your woodworking shop.
Before beginning to cut any wood, ensure your blade is sharp and in good working order. A blade that has become dull can make it almost impossible to saw as you need to. It can also cause mistakes that are costly, depending on the wood you use.
Learn how to find the center in a piece of firewood every time. Mount some flat scrap wood to the lathe’s faceplate. Attach an acrylic piece to it using some double-faced tape. Chuck that in your lathe. Turn your acrylic to a disc. Using a 1/16″ bit in your tail stock chuck, drill a hole through that center-point. Scribe some concentric circles on to the disc at 1/2″³ intervals using a skew chisel. Position this center-finder over the end of your stock and adjust it until one of your circles is inscribed completely in a portion of the wood that is solid and usable. Using an awl or nail set, mark your center through the central hole in the disc.
If you are working on your projects in your garage, keep your garage door open. You will be created a lot of wood dust. An open garage door allows your work area to be properly ventilated. Also, during the day, you work area will be better lighted with the garage door opened.
Build the best that you can. What this means is to not get lost in chasing perfectionism or analysis paralysis. Be honest with yourself about how good you are and cater to your strengths. Be proud of what you are able to do with woodworking, and do what you can to learn specific skills that improve on what you already have mastered.
You should now know about woodworking. Use the information above to help hone your woodworking skills. You will get better with practice and time. Use the information here, and experience the joy of success. Go forth and have fun!