Introducing yourself to woodworking as an art can be an exciting time. However, many people get quickly discouraged because they feel there is too much of a complexity to the field. Instead, you must understand that all creations are unique and that you just need to slow down and enjoy yourself. Continue reading for some helpful tips about embracing woodworking as a hobby.
Tape can be your friend when gluing stained wood together. Place the two pieces of wood together in a clamp and tape the seam before applying the glue. Carefully cut the tape along the joint and then separate the two pieces of the wood and apply the glue along the joint. Clamp together and allow to dry. The tape will keep the glue off the wood and is easy to remove once the glue is dried.
If you would like to start woodworking as a hobby or a business, always buy the highest quality tools that you can find. While you may be able to find cheaper tools, they will end up breaking during your project. Spend the extra money and buy a quality tool that will last a lifetime.
Dust can ruin the finish of any woodworking project. Keep dust away from your projects and workbench by vacuuming it up. If you blow or brush it away, it will just land somewhere else, likely back on your project. Also, use a damp cloth to wipe all surfaces before you begin top-coating, or staining.
Do not make the mistake of buying woodworking supplies based on the price alone. This can turn out to be a mistake that will cost you more in the end. If the supplies you buy are not very good quality, they will wear out sooner than more expensive tools, which means you will have to replace them much sooner.
Never skip sanding when it is necessary or think that staining hides imperfections in the wood. Wood with scratches, dents and nicks absorbs much more finish or stain than wood that is smooth. When you skip sanding or do not do a thorough job of it, the imperfections stand out even more because of the increased absorption.
Many people use utility knives to cut veneer. This can be very dangerous; however, take heart, there is a better way. When cutting veneer, consider using a rotary cutting tool. These inexpensive tools can be purchased in your local fabric shop. Rotary cutting tools allow you to trim veneer to the perfect size.
When staining woods, always test in a hard to see area before moving forward. In fact, if you’ve got a piece of scrap wood, that’s even better. You never know how a type of wood will take to stain, so it’s best to find out in a place that won’t be an issue later on.
Make sure that you have the proper ear protection. Woodworking can be very loud. Continued exposure to the noise can cause some hearing loss. Good headphones or even disposable ear plugs are good ideas. Make certain that you use some form of protection when operating machinery.
Did you know that the teeth on a hacksaw face forward? Many people do not know this. It is the opposite of a wood saw. These saws are supposed to cut when pushed forward. Many times the blades are not labeled for correct installation. If this is the case, remember to put the teeth facing forward.
Are you ready to get out there and be a woodworking hobbyist? What do you plan to create? Hopefully the tips that have been explained can help you get going with your art. It’s going to be fun, and you just never know what you might end up making.
Leave a Reply