Learning how to become good at woodworking takes time and practice. The following advice is going to help you prepare for taking on this craft. No matter what you’re trying to make with wood, these universal tips are going to get you started. Join in on the fun today, and start seeing what you can create.
Always put your safety first when it comes to using tools, stains and paints. The more variety you use, the more specifics there are about applications, tool use, times for drying, and more. Put your safety first by reading the instructions, wearing any necessary protective gear, and working in areas with good ventilation whenever using oil-based products or anything that produces air pollutants.
Dust can ruin the finish of any woodworking project. Keep dust away from your projects and workbench by vacuuming it up. If you blow or brush it away, it will just land somewhere else, likely back on your project. Also, use a damp cloth to wipe all surfaces before you begin top-coating, or staining.
You should know how to work with wood while using hand tools as well as power tools. If you are doing one quick action, it may be in your best interest to use a hand tool, but if you are completing a larger task, power tools will save you a lot of time.
Only cut using sharp tools. Older and dull tools result in tear-outs and even chipping, which is frustrating and a waste of time. Sharp tools means you get clean cuts quickly. You’ll also spend a lot less time sanding things to get just the right look and fit that you need.
You can apply stain with either a brush, or a rag. Work the stain in against the grain, and with it as well. You need not be neat, just get a smooth, even coat on the wood. Then, wipe immediately for a lighter tone, or leave it on for up to fifteen minutes before wiping for a deeper tone.
You can prevent glue stains by placing masking tape along the joints of wood being adhered. First, tape the wood together along the joint, then use an Exacto knife to cut through the tape at the joint line. Following this, glue the pieces of wood together and clamp them. Just before the glue has dried completely, you can peel the tape off.
Make accurate lines and measurements by using a drafting square instead of a drywall square, yardstick or ruler. Drafting squares are smaller and easier to manage and are much more accurate than any of these tools. This is a handy tool to keep at your side because it is smaller. Additionally, drafting squares are very affordable, selling for about five bucks at any art supply store.
Wear goggles when you are working on your pieces. Wood might fly toward your face at any time, and you want to avoid a trip to the emergency room. You might not think that it is a possibility, but this is one time when it is really important to be cautious.
You can make your own router base using quarter-inch acrylic, which is easy to purchase at a home improvement center. This type of homemade router base is stronger and more reliable than the type that comes with a router. You will get a better and more accurate straight edge due to the superior strength and stability of this material. Just use the base that came with your router as a pattern to create your own durable router base using an acrylic sheet.
Now that you’ve read this advice about woodworking, you’re prepared to put it into practice. Use your skills, and trust in your abilities to make something totally unique. Woodworking isn’t always about uniformity but art instead. So get out there and show the world what you’re made of and what you can make.