Woodworking is one of the oldest artisan crafts available to people in modern-day society. However, the slow, time-consuming craft often can feel out of place in the hustle and bustle of today’s business market–despite the high demand for beautiful, skillfully created pieces. With some time and consideration, you can make a place for your woodworking business, even in the sea of modern technologies.
If you will be re-coating an existing finish, be sure that the surface is clean and free of any wax or oils. Then, let it dry completely, and lightly scuff the surface with a 220-grit sandpaper so that the finish you are applying will have something to hold onto.
Stir, never shake stains and finishes before use. Over time, these settle, so mixing is necessary. Shaking, however, adds bubbles and doesn’t always mix the stain or finish thoroughly. Stirring mixes the products better by evenly mixing in any settlement that occurred during storage. Stains and finishes that are not mixed thoroughly will not apply correctly to the wood you’re staining and are at risk of looking blotchy.
If you’re looking for that first woodworking project, how about starting with a simple box? In fact, that’s probably the most popular first woodworking project out there. Buy some cheap wood that you like, and design a box that could work around your home. Maybe it’s for writing utensils, or perhaps it’s for the kitchen? There are a lot of options.
Take baby steps when first starting out with woodworking. It’s a lot of fun to learn, but woodworking is also pretty dangerous if you get too cocky too soon. Even when you feel like you know the basics, keep practicing them. And always where safety gear. You are much better off.
Learn about using pilot holes. This is pretty simple to do. When driving a screw or hammering a nail into a little piece of wood or getting pretty close to the edge of a piece, it tends to split. Sometimes it’s unavoidable to put a fixing into a place like this. However, drilling a hole through the joint that’s a bit smaller than the fixing can prevent it from splitting.
If you do woodworking at home, create a well-lit, organized area in your home or garage to serve as your workshop or hobby area. Keeping your tools and supplies in one place and well-organized keeps you safer, more productive and enjoying the time spent working on your projects. This is important whether you have a large or small workshop, so set up the space with both lighting and organization at the top of your workshop to-do list.
Do you know that different colored tin snips make different kinds of cuts? Tin snips with red handles are used for making left hand turns. Green handled tin snips are used for making right hand turns. Finally, yellow handled tin snips are used for straight lines and gradual curves.
Learn about the different type of wood and their characteristics. This will help you choose the right wood for your projects. For example, pine is a popular choice for common wood projects and furniture, but you have to be aware of the knots that can sometimes affect your cutting. A wood like maple has a smoother grain and less knots.
Although many naysayers will tell you woodworking is a dying craft, there is no statement further from the truth. Every day, people require woodworking for construction, home improvement projects, art, and countless other uses. By taking into consideration the demand for your product and utilizing your skills effectively and efficiently, you can ensure the success of your woodworking business.