Are you able to work with your hands? Do you find measuring to exact dimensions is simple for you? Would you love to be able to create useful products in your spare time? If so, the hobby of woodworking is truly for you. In fact, you might even be able to turn it into a career with the tips below.
If you would like to start woodworking as a hobby or a business, always buy the highest quality tools that you can find. While you may be able to find cheaper tools, they will end up breaking during your project. Spend the extra money and buy a quality tool that will last a lifetime.
Use stop blocks to your advantage for more accurate work. When cutting a lot of pieces the same size, no matter how carefully you measure, you often find small variations. Use a pre-cut stop block to make those measurements pinpoint accurate. Then the table saw will stop at just the right length length.
Begin small with woodworking projects. It can be very exciting to get yourself ready for your first woodworking project, but don’t let your excitement overtake your smarts. Buy only what you need, no more for right now. Don’t fall for buying tools that you currently don’t need as you may find better alternatives in the future.
Make sure your workbench is the proper height. It really can make a big difference. It needs to fit you and how you work. Usually if you are around 5’6″ to 5’9″ you probably need one that is between 33″ and 36″ high. If you are 5’10” or taller, you may need one that is between 35″ and 37″ high. Use your bench at its current height to determine if you need to change it to work better for you.
If you use laminate to finish a project, use some tin snips so you trim the laminate. These make cutting laminate much easier. Getting a set of tin snips you’ll only use for laminate will keep your snips sharp.
You should know how to work with wood while using hand tools as well as power tools. If you are doing one quick action, it may be in your best interest to use a hand tool, but if you are completing a larger task, power tools will save you a lot of time.
Shop around for used power tools. Many times you can find great deals on used power tools. Your wallet will be happy if you shop around a little bit.
Never cut any pieces of wood without checking for nails, screws and other metal. While donning a pair of goggles keeps your eyes protected, you are still at risk for other injuries. Inspect every piece of wood whether you are re-purposing it or using new lumber. You are better safe than sorry with this safety tip, and checking the boards only takes a few minutes of your time.
If you are working on your projects in your garage, keep your garage door open. You will be created a lot of wood dust. An open garage door allows your work area to be properly ventilated. Also, during the day, you work area will be better lighted with the garage door opened.
Do you know that different colored tin snips make different kinds of cuts? Tin snips with red handles are used for making left hand turns. Green handled tin snips are used for making right hand turns. Finally, yellow handled tin snips are used for straight lines and gradual curves.
Regardless of your current skill level, the tips above should help you improve your technique. Take each into your mind as you use them when you work. If you can integrate them into your current procedures, you’ll find that the time you spend working with wood will improve day by day.
Leave a Reply