You might be one of those people who thought they weren’t good with their hands. However, if you take the time to give it a try, woodworking can show you how magical your hands can be. With just the right tips, outlined below, you’re going to be able to make all kinds of pieces. Keep reading!
The reason why many power tools have guards on them is to keep you safe. Never remove the guards off of any of your tools. You may not understand why they are there, but they are there for a reason. They are there to protect you from sharp blades, moving parts and other things that could potentially hurt you.
Organize your shop’s extension cords to keep your shop safe and tidy. You can make your own cord keeper with nothing more than a scrap piece of wood. Simply cut a piece of wood in the shape of an I and wrap each of your extension cords around the wood.
Gel stains are the new big thing for staining furniture and other wood projects that need staining. Liquid-based stain often runs on application, and gel stains stay put much better. Additionally, because gel stains are thicker the pigment remains consistent throughout the application allowing for more even staining on horizontal and vertical pieces.
Try using duct tape to create a level spot. If you’ve used your table saw on a base that’s mobile, you should be able to easily pull it in and out. To really finish it up, find a level spot on your floor. This also helps you saw boards without obstruction. Mark your wheel positions using duct tape that is brightly colored, and then roll the saw to that same flat spot each time you need to saw.
When sanding a piece of lumber, beginning with a coarse sandpaper. Remove the excess dust from the lumber. Then, once the largest scratches are removed, sand again with a smoother sandpaper. Follow this sanding with a tack cloth. Continue using smoother sandpaper until the lumber feels smooth when you run your hand across it.
It is essential for you to have sharpened tools if you plan on working with wood. Dull tools can be dangerous since they are more prone to slippage. If you have no idea how to hone and sharpen your tools, you will need to learn how since there won’t always be someone around to do it for you.
Tin snips can help you better trim laminate when doing your wood projects. Tin snips are a great way to cut or trim the laminate into the size you want. If you buy a pair of snips specifically for laminate cuts, they’ll always be sharp for you.
Glue can cause nasty stains on your finished work. You can eliminate stains easily using a piece of tape. First, clamp your wood together without any glue. Put a piece of tape over the joint. Cut the tape on the joint with a sharp knife. You can now clamp the wood together with glue and any excess will ooze onto the tape, not the wood.
Add a bit more spring to your hand grip. Trying to make use of a spring clamp when you only have one free hand is not always easy. They are very difficult to open with just one hand. You can make it easier on yourself. Use two hands to put your clamps onto a piece of scrap wood. This will have them easy to reach and ready to go so you can use them with one hand.
You may think that you can’t be an expert at woodworking, but if you stay interested and learn as much as you can, your expert status is all but guaranteed. Just take it slowly and use everything you have learned here to make great-looking wood pieces that you can show off to everyone. Good luck!