When you are looking for a new hobby, look no further than woodworking. This amazing pastime combines skill building with the creation of items you can actually use around your home. If you want a hobby that allows you to do something good, the tips below will help you join in.
Don’t neglect sanding your wood. Sanding may be tedious, but the quality of your workmanship will suffer if you leave the scrapes and nicks where they are. Not to mention, those scratches and nicks absorb more stain and paint, making them stand out more, and making your work look shoddy.
Become more accurate by using a drafting square. If you need an accurate square that’s about 2″ to 3″, you have limited options. Drywall squares tend to be very inaccurate. With carpenter squares, you have to hook them onto your work piece’s edge. A drafting square can be easily used if you happen to have one lying around. If you don’t, they are pretty cheap to find at art stores. They are incredibly accurate and as useful as a tape measure.
Clean your saw’s teeth before cutting lumber. To thoroughly clean your saw blade dip a shop rag into a little acetone and wipe the blade thoroughly. Additionally, using a piece of sandpaper that has a fine grit will remove any sap or gumminess from your skill saw’s cutting blades.
Begin small with woodworking projects. It can be very exciting to get yourself ready for your first woodworking project, but don’t let your excitement overtake your smarts. Buy only what you need, no more for right now. Don’t fall for buying tools that you currently don’t need as you may find better alternatives in the future.
It is essential for you to have sharpened tools if you plan on working with wood. Dull tools can be dangerous since they are more prone to slippage. If you have no idea how to hone and sharpen your tools, you will need to learn how since there won’t always be someone around to do it for you.
Always be on the lookout for good woodworking tips. If you meet professionals, ask them for their best tips. If you find a magazine chock full with tips, pick it up so that you can keep it in your archive. Even record TV shows that have woodworking in them to glean any tips you my find there.
Plan out your project and go over it a few times before you start. This will help prevent you from making mistakes that will ruin your project. You do not want to start it all over again, so plan it out well before you cut, screw or nail anything together.
Wear gloves when you are doing your woodworking projects. A natural part of woodworking is the risk of getting splinters and other injuries from the wood. If you find it difficult to work well with the gloves you should shop for a pair that does not hinder your performance so that you can be safe.
If you mark your intended cuts with pencil lines, try not to actually cut them! You might be lined up at first, but it is possible to get a little off later in the cut, resulting in pieces that fit less that perfectly. It’s better to cut the edge of the pencil line and then sand the rest of the marking off.
These ideas aren’t all new, yet they’re all worth reading. Those which are new to you will serve to better your techniques. Those which are old hat are reminders that you should continually pay attention to how you are working with wood. Together, they will build you into a master wood craftsman.
Leave a Reply