Either you want to make things for sale or you just want to work with wood for the entertainment value. Your reasons do not matter. Woodworking is not terribly difficult, but it does take some know-how. The article below is a compilation of expert information and tips that you can put into practice immediately.
Before you commit stain to wood, it is usually a good idea to test out the stain in an unseen area of the wood first. This way you will avoid any surprises in case the color of the stain looks different after application. Keep in mind that it is not easy to guess how wood stain will turn out; therefore, you should always test out the stain on a piece of wood to prevent disappointment.
You can use tape to catch excess glue. If you want to prevent oozing glue stains along joints, try clamping pieces together without using any glue. You just put tape on your joint, and then cut along it using a sharp blade. Separate your pieces, and then apply glue. After that, clamp them to each other again. Your glue will ooze on the tape instead of the wood. You can peel off the tape before your glue dries.
In a pinch, you can use a hacksaw blade as a makeshift compass. Often you can’t find a compass when you need it in room, when you are away from your shop. You can quickly nail a hole in the middle of a hacksaw blade, then steady the pencil against the proper tooth to get the right length. Draw that circle.
Unless you are charging it, never leave your tools plugged in and unattended. You never know who might approach your tool, accidentally setting it off. Not only can this damage the items around it, but the person could be hurt and you could be left liable for the end result.
Test the color of a stain before doing the complete stain on more visible areas. Wood is never predictable, so a stain may not look the way you expect or need it to when applied to the wood you are using. When you test the stain in a spot that’s not easily visible, you prevent having a project turn out badly.
Always check your tools before you begin using them. Woodworking with a faulty or overused tool can easily lead to a serious injury or destruction of your materials. To make sure that this does not happen to you take the time to thoroughly inspect your tools from top to bottom.
Never cut any pieces of wood without checking for nails, screws and other metal. While donning a pair of goggles keeps your eyes protected, you are still at risk for other injuries. Inspect every piece of wood whether you are re-purposing it or using new lumber. You are better safe than sorry with this safety tip, and checking the boards only takes a few minutes of your time.
Look to video to learn different woodworking techniques. Seeing woodworking in action is a really powerful way to learn. It is, after all, a very hands on skill you’re picking up. Look to YouTube as a start. There are many videos there going over top skills related to woodworking.
One thing to keep in mind with woodwork is always crowning your wood. This is done by looking down the edge of your lumber and finding the high side. Always put the high side up, which will create a more uniform and more supportive floor and roof line for your home.
Now that you now more about woodworking, you are ready to get started. Use what you’ve just learned, and you will do quite well. Enjoy the process as you improve your skills and make wonderful creations. You are about to find out just how much of a joy woodworking really is!